| SUS-LIB | Sustaining Member Library |
|---|---|
| AWN | Arc Welding and Cutting Noise(39p) |
| AWS | Characterization of Arc Welding Fume(55p) |
| A1.1-98 | Metric Practice Guide for the Welding Industry(23p) |
| A2.4-98 | Standard Symbols for Welding, Brazing, and Nondestructive Examination(109p) |
| A3.0-94 | Standard Welding Terms and Definitions (Including Terms for Brazing, Soldering, Thermal Spraying and Thermal Cutting)(119p) |
| A4.2M-97 | Standard Procedures for Calibrating Magnetic Instruments to Measure the Delta Ferrite Content of Austenitic and Duplex Ferritic-Austenitic Stainless Steel Weld Metal(25p) |
| A4.3-93 | Standard Methods for Determination of the Diffusible Hydrogen Content of Martensitic, Bainitic, and Ferritic Steel Weld Metal Produced by Arc Welding(17p) |
| A5.01-93 | Filler Metal Procurement Guidelines(10p) |
| A5.1-91 | Specification for Carbon Steel Electrodes for Shielded Metal Arc Welding(46p) |
| A5.2-92 | Specification for Carbon and Low Alloy Steel Rods for Oxyfuel Gas Welding(9p) |
| A5.3M-99 | Specification for Aluminum and Aluminum-Alloy Electrodes for Shield Metal Arc Welding(17p) |
| A5.4-92 | Specification for Stainless Steel Electrodes for Shielded Metal Arc Welding(31p) |
| A5.5-96 | Specification for Low-Alloy Steel Electrodes for Shielded Metal Arc Welding(46p) |
| A5.6-84 | Specification for Covered Copper and Copper Alloy Arc Welding Electrodes(18p) |
| A5.7-84 | Specification for Copper and Copper Alloy Bare Welding Rods and Electrodes(11p) |
| A5.8-92 | Specification for Filler Metals for Brazing and Braze Welding(25p) |
| A5.9-93 | Specification for Bare Stainless Steel Welding Electrodes and Rods(24p) |
| A5.10M-99 | Specification for Bare Aluminum and Aluminum-Alloy Welding Electrodes and Rods(29p) |
| A5.11M-97 | Specification for Nickel and Nickel-Alloy Welding Electrodes for Shielded Metal Arc Welding(35p) |
| A5.12M-98 | Specification for Tungsten and Tungsten-Alloy Electrodes for Arc Welding and Cutting(15p) |
| A5.13M-80 | Specification for Solid Surfacing Welding Rods and Electrodes(22p) |
| A5.14M-99 | Specification for Nickel and Nickel-Alloy Bare Welding Electrodes and Rods(23p) |
| A5.15-90 | Specification for Welding Electrodes and Rods for Cast Iron(21p) |
| A5.16-90 | Specification for Titanium and Titanium Alloy Welding Electrodes and Rods(11p) |
| A5.17M-97 | Specification for Carbon Steel Electrodes and Fluxes for Submerged Arc Welding(31p) |
| A5.18-93 | Specification for Carbon Steel Electrodes and Rods for Gas Shielded Arc Welding(30p) |
| A5.19-92 | Specification for Magnesium Alloy Welding Alloy Welding Electrodes and Rods(17p) |
| A5.20-95 | Specification for Carbon Steel Electrodes for Flux Cored Arc Welding(32p) |
| A5.21-80 | Specification for Composite Surfacing Welding Rods and Electrodes(19p) |
| A5.22-95 | Specification for Stainless Steel Electrodes for Flux Cored Arc Welding and Stainless Steel Flux Cored Rods for Gas Tungsten Arc Welding(36p) |
| A5.23M-97 | Specification for Low-Alloy Steel Electrodes and Fluxes for Submerged Arc Welding(37p) |
| A5.24-90 | Specification for Zirconium and Zirconium Alloy Welding Electrodes and Rods(10p) |
| A5.25-97 | Specification for Carbon and Low-Alloy Steel Electrodes and Fluxes for Electroslag Welding(27p) |
| A5.26M-97 | Specification for Carbon and Low-Alloy Steel Electrodes for Electrogas Welding(27p) |
| A5.28-96 | Specification for Low-Alloy Steel Electrodes and Rods for Gas Shielded Arc Welding(33p) |
| A5.29-98 | Specification for Low-Alloy Steel Electrodes and Rods for Gas Shielded Arc Welding(37p) |
| A5.30-97 | Specification for Consumables Inserts(23p) |
| A5.31-91 | Specification for Fluxes for Brazing and Braze Welding(11p) |
| A5.32M-97 | Specification for Welding Shielding Gases(19p) |
| A9.1-92 | Standard Guide for Describing Arc Welds in Computerized Material Property and Nondestructive Examination Databases(9p) |
| A9.2-92 | Standard Guide for Recording Arc Weld Material Property and Nondestructive Examination Data in Computerized Database(7p) |
| B1.10-99 | Guide for the Nondestructive Examination of welding(41p) |
| B1.11-88 | Guide for the Visual Inspection of welds(30p) |
| B2.1-98 | Specification for Welding Procedure and Performance Qualification(219p) |
| B2.2-91 | Standard for Brazing Procedure and Performance Qualification(44p) |
| B4.0-98 | Standard Methods for Mechanical Testing of welds(98p) |
| B4.0-00 | Standard Methods for Mechanical Testing of welds(104p) |
| B5.5-00 | Specification for the Qualification of Welding Educators(19p) |
| B5.17-00 | Specification for the Qualification of Welding Fabricators(8p) |
| C1.1M-00 | Recommended Practices for Resistance Welding(105p) |
| C1.3-70 | Recommended Practices for Resistance Welding Coated Low Carbon Steels(11p) |
| C1.4M-99 | Recommended Practices for Resistance Welding of Carbon and Low-Alloy Steels(19p) |
| C2.14-74 | Corrosion Tests of Flame-Sprayed Coated Steel (19-Year Report)(31p) |
| C2.16-92 | Guide for Thermal-Spray Operator Qualification(9p) |
| C3.2-82 | Standard Method for Evaluating the Strength of Brazed Joints in Shear(7p) |
| C3.3-80 | Recommended Practices for Design, Manufacture, Inspection of Critical Brazed Components(11p) |
| C3.4-99 | Specification for Torch Brazing(11p) |
| C3.5-99 | Specification for Induction Brazing(11p) |
| C3.6-99 | Specification for Furnace Brazing(11p) |
| C3.7-99 | Specification for Aluminum Brazing(13p) |
| C3.8-90 | Recommended Practices for Ultrasonic Inspection of Brazed Joints(2p) |
| C4.1-77 | Criteria for Describing Oxygen-Cut Surfaces((2p) |
| C4.2-90 | Operator's Manual for Oxyfuel Gas Cutting(20p) |
| C4.3-83 | Operators Manual for Oxyfuel Gas Heating Torch Operation(9p) |
| C4.5-00 | Uniform Designation System for Oxyfuel Nozzles(7p) |
| C5.1-73 | Recommended Practices for Plasma-Arc Welding(67p) |
| C5.2-83R | Recommended Practices for Plasma Arc Cutting(15p) |
| C5.3-91 | Recommended Practices for Air Carbon Arc Gouging and Cutting(19p) |
| C5.4-93 | Recommended Practices for Stud Welding(35p) |
| C5.5-80 | Recommended Practices for Gas Tungsten Arc Welding(38p) |
| C5.6-89 | Recommended Practices for Gas Metal Arc Welding(65p) |
| C5.7-89 | Recommended Practices for Electrogas Welding(49p) |
| C5.10-94 | Recommended Practices for Shielding Gases for Welding and Plasma Arc Cutting(46p) |
| C6.1-89 | Recommended Practices for Friction Welding(27p) |
| C7.1-89 | Recommended Practices for Electron Beam Welding(58p) |
| C7.2-98 | Recommended Practices for Laser Beam Welding, Cutting, and Drilling(108p) |
| C7.3-99 | Process Specification for Electron Beam Welding(12p) |
| D1.1-00 | Structural Welding Code-Steel(450p) |
| D1.2-97 | Structural Welding Code - Aluminum(212p) |
| D1.3-98 | Structural Welding Code-Sheet Steel(63p) |
| D1.4-98 | Structural Welding Code-Reinforcing Steel(45p) |
| D1.5-96 | 1996 Bridge Welding Code(230p) |
| D1.6-99 | Structural Welding Code-Stainless Steel(210p) |
| D3.5-93 | Guide for Steel Hull Welding(107p) |
| D3.6-99 | Specification for Underwater Welding(131p) |
| D3.7-90 | Guide for Aluminum Hull Welding(65p) |
| D8.6-77 | Standard for Automotive Resistance Spot Welding Electrodes(67p) |
| D8.7-88 | Rcommended Practices for Automotive Weld Quality-Resistance Spot Welding(6p) |
| D8.8-97 | Specification for Automotive and Light truck Components Weld Quality Components Weld Quality -Arc Welding(15p) |
| D8.9-97 | Recommended Practices for Test Methods for Evaluating the Resistance Spot Welding Behavior of Automotive Sheet Steel Materials(55p) |
| D9.1-90 | Sheet Metal Welding Code(46p) |
| D10.4-96 | Recommended Practices for Welding Austenitic Chromium-Nickel Stainless Steel Piping and Tubing(34p) |
| D10.6M-00 | Recommended Practices for Gas Tungsten Arc Welding of Titanium Piping and Tubing(19p) |
| D10.7-86 | Recommended Practices for Gas Shielded Arc Welding of Aluminum and Aluminum Alloy Pipe(31p) | D10.8-96 | Recommended Practices for Welding of Chromium-Molybdenum Steel Piping and Tubing(12p) | D10.10M-99 | Recommended Practices for Local Heating of Welds in Piping and Tubing(101p) | D10.11-87R | Recommended Practices for Root Pass Welding of Pipe Without Backing(14p) | D10.12-89 | Recommended Practices and Procedures for Welding Low Carbon Steel Pipe(51p) | D10.12-00 | Guide for welding Mild Steel Pipe(39p) | D10.13-95 | Recommended Practices for the Brazing of Copper Pipe and Tubing for Medical Gas Systems(7p) | D11.2-89 | Guide for Welding Iron Castings(125p) | D14.1-97 | Specification for Welding of Industrial and Mill Cranes and Other Material Handing Equipment(131p) | D14.2-93 | Specification for Metal Cutting Machine Tool Weldments(31p) | D14.3-94 | Specification for Welding Earthmoving and Construction Equipment(100p) | D14.3-00 | Specification for Welding Earthmoving and Construction Equipment(97p) | D14.4-97 | Specification for Welded Joints in Machinery and Equipment (127p) | D14.5-97 | Specification for Welding of Presses and Press Components(146p) | D14.6-96 | Specification for Welding of Rotating Elements of Equipment(101p) | D15.1-93 | Railroad Welding Specification - Cars and Locomotives(318p) | D15.2-94 | Recommended Practices for the Welding of Rail and Related Rail Components for Use by Rail Vehicles(29p) | D16.2-94 | Standard for Components of Robotic and Automatic Welding Installations(10p) | D16.4-99 | Specification for the Qualification of Robotic Arc Welding Personnel(9p) | D18.1-99 | Specification for Welding of Austenitic Stainless Steel Tube and Pipe Systems in Sanitary(Hygienic) Applications(10p) | D18.2-99 | Guide to Weld Discoloration Levels on Inside of Austenitic Stainless Steel Tube(2p) | F1.1-99 | Method for Sampling Airborne Particulates Generated by Welding and Allied Processes(11p) | F1.2-99 | Laboratory Method for Measuring Fume Emission of Welding and Allied Processes(13p) | F1.3-99 | A Sampling Strategy Guide for Evaluating Contaminants in the Welding Environment(18p) | F1.4-97 | Methods for Analysis of Airborne Particulates Generated by Welding and Allied Processes(17p) | F1.5-96 | Methods for Sampling and Analyzing Cases from Welding and Allied Processes(37p) | F2.1-78 | Recommended Safe Practice for Electron Beam Welding and Cutting(8p) | F3.1-89 | Guide for Welding Fume Control(18p) | F4.1-99 | Recommended Safe Practices for the Preparation for Welding and Cutting of Containers and Piping(8p) | G1.2M-99 | Specification for Standardized Ultrasonic Welding Test Specimen for Thermoplastics(21p) | Z49.1-99 | Safety in Welding, Cutting, and Allied Processes(52p) |
하단배너1
하단배너2
하단배너3
하단배너4
하단배너5
하단배너6
하단배너7
하단배너8
하단배너9
하단배너11
footer 로고